Screw pump is a positive-displacement pump that use one or several screws to move fluids or solids material along the screw axle. There are single screw pump, double screw pump, the triple screw pump, as well as the quintuple screw pump. For drilling mud process, we use the screw pump to transfer drilling fluid to decanting centrifuge from desilter tank or centrifuge tank Screw pump transfer drilling fluid via the screw conveyor rotation. Center screw pole is the positive pole, the two sides screw conveyor are negative pole. Negative poles rotate at opposite direction with positive pole. Actually when the screw conveyor is rotating, lower V room will become large. V room will close against fluid sucked. Closed room will be pushed forward along axle. Then new suction cavity generates on suction end. One and one closed cavity move forward, the fluid will be pressed out. Screw Pump Technical Parameters Model Speed(rpm) Capacity(m3/h) Pressure(Mpa) Head(m) Motor(KW) Outlet Flange (mm) Permitted Solids Dia.(mm) Fiber Length (mm) APG35-2 960 8 1.2 120 4 50 3 40 APG40-1 12 0.6 60 4 65 3.8 45 APG40-2 12 1.2 120 5.5 65 3.8 45 APG50-1 20 0.6 60 5.5 80 5 50 APG50-2 20 1.2 120 7.5 80 5 50 APG60-1 30 0.6 60 11 100 6 60 APG60-2 30 1.2 120 15 100 6 60 APG70-1 720 45 0.6 60 11 125 8 70 APG70-2 45 1.2 120 15 125 8 70 APG85-1 65 0.6 60 15 150 10 80 APG85-2 65 1.2 120 18.5 150 10 80 APG105-1 145 0.6 60 22 200 15 110 APG105-2 145 1.2 120 30 200 15 110 APG135-1 350 0.6 60 37 250 20 150 APG135-2 350 1.2 120 45 250 20 150